These kits are specifically designed to repair the Nippon Denso starter motor with an intergrated solenoid body which has removable plungers and contacts. The solenoid repair kit consists of 1 x plunger complete and 2 x replacement copper contacts, also in the kit is a full set of fitting instructions which is both pictorial and written.

If you have the type of starter with the separate solenoid we can still help. You would need to replace the complete solenoid assembly which is actually very easy and only take minutes. Again there are big savings to be made over the price of replacing the complete starter.

 This type of nippon denso starter has an intergrated solenoid body and can be rebuilt using the repair kit   

 This type of nippon denso starter has a separate bolt-on solenoid assembly and is NOT rebuildable using these kits


Both types of starter can be identified by a small silver foil sticker on the body of the starter. There will be 2 sets of numbers printed on the sticker, one is the manufactures code and the other is the Nippon Denso O/E code. It is the O/E code you need to make a perfect identification. The number will start 028000 or 128000 or 228000 or 428000 followed by a further 4 numbers.

A full complete number should read 228000-4830. (SEE PHOTO BELOW)

If you can't find the sticker on your starter or you're just having difficulty reading it you can remove the solenoid cover and pull out the plunger to view the contacts. Compare them to the picture below showing the contacts and plunger we currently have in stock. Once you've identified the parts you require use the contact form to let me know which numbers you require.



For your information No8 has a 35mm pin extending from underneath the plunger body and No11 has a 40mm pin.



Kits available for the following vehicles :-

HYUNDAI MODELS

Elantra 2.0 CRDI  01 onward

Grandeur 2.2 CRDI   06 onward

Santa Fa 2.0 CRDI  01 onward

Santa Fa 2.2 CRDI 05 onward

Sonata V 2.0 CRDI 06 onward

Trajet 2.0 CRDI 01 onward

Tucson 2.0 CRDI 04 onward

KIA MODELS

Carens Mk2 2.0 CRDI 02 onward

Carens Mk3 2.0 CRDI 06 onward

Magentis 2.0 CRDI 06 onward

Sedona 2.9TD - CRDI 99 onward

Sportage 2.0 CRDI 04 onward

LANDROVER / ROVER /JAGUAR  

Landrover Discovery Diesel TD5 98 onward

Landrover Defender Diesel TD5 98 onward

Landrover Freelander TD4 Diesel (BMW Engine) 2000 onward

Landrover Freelander L-Series 2.0 Diesel up to 2000

Landrover Freelander 2.5 V6 (KV6 Petrol)

Rover 75 CDT / CDTI 2.0 (Diesel)

Rover 75 2.0 / 2.5 V6 (KV6) Manual (Petrol)

Rover 75 2.0 /2.5 V6 (KV6) Automatic (Petrol)

Rover 200 / 400 / 600 L-series 2.0 (Diesel) (No petrol models use these kits)

Rover 25 / 45 L-series 2.0 Diesel inc ZR + ZS Models (No petrol models use these kits)

Rover 25 / 45 1.8 steptronic Automatic

Rover MGF 1.8 steptronic Automatic

Jaguar 3.2 & 4.0 XJ8 - XJR - XK8 - XKR up to 2002

TOYOTA / LEXUS

Toyota MR2 Mk1 1.6 16v AW11

Toyota MR2 Mk2 2.0 16v inc Turbo SW20

Toyota Supra Mk3 3.0 inc Turbo MA70

Toyota Supra Mk4 3.0 inc Turbo JZA80

Toyota Landcruiser (All models)

Toyota Hi-lux (All models)

Toyota Hi-Ace (All models)

Toyota Surf (All models)

Toyota Granvia

Toyota Previa / Estima / Lucida  (Petrol / Diesel)

Lexus GS300

Lexus IS300

Lexus Soarer 2.5 1JZGTE

If your model of Toyota isn't listed, please contact me and I'll sort you out with the correct kit. These kit also fit Corolla, Celica, Camry, Carina, Avensis plus many more....

KUBOTA PLANT AND MACHINERY

All models fitted with Nippon Denso starters

MISCELLANEOUS NIPPON DENSO REPAIR KITS

If you have a Nippon Denso Starter motor fitted to your vehicle and would like to find out if a kit is available, please phone or e-mail me (contact page) and I'll check if there is a kit for your starter.